This specially formulated solvent cut through the dried ink and paper dust that can impair print quality. Rejuvenates sponge-type cartridges and restores print quality.

Using our Cartridge and Print Head Cleaner you will be able to extend the life of you cartridge by 30%.

Instructions for Use:

If a cartridge has been left unused or stored for a long period of time, it's print nozzles will block with dried ink. Print nozzles are very delicate and sensitive and if any substance other than a specifically formulated solvent is used to clean them, damage to the nozzles and print head is likely to occur.

Allowing print heads to soak in Cartridge & Print Head Cleaner overnight can clean print nozzles and help restore print quality.

Also you can effectively prolong the life of your inkjet cartridge. When using a cartridge for one use and throwing it away when it runs out there is no need to be concerned about the life of the sponge that is inside. A cartridge treated with Cartridge & Print Head Cleaner after every third refill improves the cartridges ability to hold more ink by dissolving the dried ink residue from repeated refills. Cartridges now can last from 6 - 10 refills or more. Keeping cartridges topped off so they do not dry out also helps.

The are 3 separate ways of using the Cartridge and Print Head Cleaner.

• Fill the injector with 2 ml of cartridge cleaner and over a sink squirt the cartridge cleaner on to the print head. Be careful not to touch the print head with the injector. You will immediately see the dried ink dissolve and flush away. Air dry and reinstall into printer.
• Soak the print head in Cartridge and Print Head Cleaner. Air dry and reinstall into printer and run a cleaning cycle.
• To prolong the life of your inkjet cartridge add 1 ml of Cartridge and Print Head Cleaner into the filling hole of the cartridge. This will rejuvenate the sponge and dissolve any dried ink.

For preventative maintenance follow step 3 after every 3rd refill.